English
German
French
Spanish
Elentek specializes in the design and manufacturing of high-quality control panels and inverters for water pumps, for domestic and industrial use.
-
12V Sampling Pump Mini-Monsoon 21m
- Pumping depth: 21 m DTW
- Watt consumption (max): 195 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 13 A
- Dimensions: Length: 20″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 24 m cable, quick disconnect plug & battery clamps
255.00 € excl. VAT12V Sampling Pump Mini-Monsoon 21m
255.00 € excl. VAT -
Conductivity & Temp Meter Heron Cplus
This device provides precise information about conductivity, level of water and its temperature in wells, drill-holes, pipes and river mouths.
Price On RequestConductivity & Temp Meter Heron Cplus
Price On Request -
ATEX Oil/Water Interface Meter Heron Sm.OIL
- Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
- Detects floating product (LNAPL), sinking product (DNAPL) and water
- Measures extremely thin spots of liquid (1mm (1/200’))
- Earthing
- Electronic Module (IP65) – Automatical turning off after 10 minutes, can be easily removed if cleaning and repairing are needed
- Probe (IP68) – stands against high pressure, 19mm (3/4”), easy to replace
- Steel Tape – strong and reliable with Kynar covering, long-lasting markings in both scales
- Padded Carry Case – for protection
- Hanger – for supporting the tool on the top
- Handle – comfortable and solid handle on the frame
- Winding Handle – makes it easy to rewind with gloves on
Price On RequestATEX Oil/Water Interface Meter Heron Sm.OIL
Price On Request -
ATEX Oil/Water Interface Meter Heron H.OIL
- Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
- Detects floating product (LNAPL), sinking product (DNAPL) and water
- Measures extremely thin spots of liquid (1mm (1/200’))
- Earthing
- Electronic Module (IP65) – Automatical turning off after 10 minutes, can be easily removed if cleaning and repairing are needed
- Probe (IP68) – stands against high pressure, 19mm (3/4”), easy to replace
- Steel Tape – strong and reliable with Kynar covering, long-lasting markings in both scales
- Padded Carry Case – for protection
- Hanger – for supporting the tool on the top
- Handle – comfortable and solid handle on the frame
- Winding Handle – makes it easy to rewind with gloves on
Price On RequestATEX Oil/Water Interface Meter Heron H.OIL
Price On Request -
12V Peristaltic Pump Athena2
- Pumps up to 5 liters per minute or as low as 40 mL per minute
- Suction lift up to 8 m
- Supplied with two pump heads
- 3 m of DC battery clamps to hook up for super-long sampling events
- Dimensions: Depth 25 cm x Width 38 cm x Height 17 cm
- Weight of Product: 4.5 kg
1,759.00 € excl. VAT12V Peristaltic Pump Athena2
1,759.00 € excl. VAT -
Float switch FLO
- Cable: 10m
- Power supply: max. 10A 250V
- Activation angle: 45°
- Depth: max. 10 m
- Temperature: max. +50°C
35.00 € excl. VATFloat switch FLO
35.00 € excl. VAT -
3″ ATEX Pump 99 316 TREINCH EX 40-22
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 40-22
Price On Request -
3″ ATEX Pump 99 316 TREINCH EX 40-15
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 40-15
Price On Request -
3″ ATEX Pump 99 316 TREINCH EX 25-20
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 25-20
Price On Request -
BE 80-200-13 2.2 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-200-13 2.2 kW
Price On Request -
BE 80-200-9 1.5 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-200-9 1.5 kW
Price On Request -
BE 80-200-6 1.1 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-200-6 1.1 kW
Price On Request -
BE 80-100-24 2.2 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-100-24 2.2 kW
Price On Request -
BE 80-100-17 1.5 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-100-17 1.5 kW
Price On Request -
BE 80-100-13 1.1 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-100-13 1.1 kW
Price On Request
