QED Environmental Systems is a leading producer of the pneumatic pumps of the QED AP (AutoPump) series and active and passive skimmers specifically designed for environmental remediation.

  • ATEX Gas Analyser Geotech BIOGAS 5000

    • Certified: ATEX, IECEx, CSA, MCERTS, and UKAS calibration (ISO17025)
    • Robust, high-quality design fit for anaerobic digestion sites
    • Reliably measures gas levels of CH4 (0-100%); CO2 (0-100%); O2 (0-25%)
    • Optional measurable gases include H2 (0-1000ppm); NH3 (0-1000ppm); also H2S (0-50, 200, 500, 1,000, 5,000 or 10,000ppm
    • Calculates balance gas and flow
    • Reads temperature with optional temperature probe
    • Easy field calibration by the user
    • Self-test and self-monitoring on startup
    • Data storage download
    • Infra-red bench technology
    • ATEX Certified – Zone 1
    Price On Request
  • Pulse Emitter IWM-PL3

    IWM-PL3 is suitable for many applications for remote reading in the residential, commercial and industrial sectors, acting as an electronic impulse that allows the acquisition of the consumption of the counter by third-party systems with a universal interface and integrating advanced counting and detection functions frauds.

    Price On Request

    Pulse Emitter IWM-PL3

    Price On Request
  • Water Meter B Meters GMDM-I

    Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.

    Water Meter B Meters GMDM-I

    From: 29.00 
  • ATEX Oil/Water Interface Meter Geotech

    The Geotech oil/water interface meter is a robust and accurate device to detect and measure the thickness of floating and dense non-aqueous fluids in a water well, tank, or natural reservoir.

    Price On Request
  • QED AutoPump AP2

    • Efficient operation in wells with diameters as small as 2″
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function and pumps particles up to 1/8 inch in diameter.
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP2

    Price On Request
  • Portable 4-Gas Analyser Geotech G210

    Geotech G210 is a gas analyzer specially designed for detecting gas leaks and controlling the piped gas levels in hospitals and medical facilities. This instrument is handheld, lightweight, and user-friendly.

    Price On Request
  • Geotech GEM PRO Gas Extraction Manager

    • Pre-calibrated Modular design
    • Module Care Packs
    • 1-7 gases configured by the operating system
    • Records static, differential, and system pressures
    • Calculates gas flow and heat value
    • Live addition of well IDs in the field
    • GPS location tagging
    • Hydrogen-compensated CO measurement (Opt)
    • Field replaceable battery pack
    • WIFI and Bluetooth communications
    • Utilises GAMSoft software
    • ATEX zone 1 hazardous area certification
    • 3-year warranty
    Price On Request
  • QED SOS AutoGenie Active Skimmer

    • SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED SPG AutoGenie Active Skimmer

    • SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 40-22

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 40-15

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 25-20

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • BE 80-200-13 2.2 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-13 2.2 kW

    Price On Request
  • BE 80-200-9 1.5 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-9 1.5 kW

    Price On Request
  • BE 80-200-6 1.1 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-6 1.1 kW

    Price On Request

Main Menu