QED Environmental Systems is a leading producer of the pneumatic pumps of the QED AP (AutoPump) series and active and passive skimmers specifically designed for environmental remediation.
-
12V Sampling Pump Super Twister 25m
- Pumping depth: 25 m DTW
- Watt consumption (max): 195 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 13 A
- Dimensions: Length: 22″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 27 m cable, quick disconnect plug & battery clamps
325.00 € excl. VAT12V Sampling Pump Super Twister 25m
325.00 € excl. VAT -
12V Sampling Pump Twister 18m
- Pumping depth: 18 m DTW
- Watt consumption (max): 165 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 11 A
- Dimensions: Length: 17″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 21 m cable, quick disconnect plug & battery clamps
235.00 € excl. VAT12V Sampling Pump Twister 18m
235.00 € excl. VAT -
12V Sampling Pump Hurricane 46m
- Pumping depth: 46 m DTW
- Watt consumption (max): 510 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 34 A
- Dimensions: Length: 26″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 48 m cable, quick disconnect plug
- Required: Power Booster 2 Controller
579.00 € excl. VAT12V Sampling Pump Hurricane 46m
579.00 € excl. VAT -
12V Sampling Pump Tornado 30m
- Pumping depth: 30 m DTW
- Watt consumption (max): 210 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 14 A
- Dimensions: Length: 27″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 33 m cable, quick disconnect plug & battery clamps
349.00 € excl. VAT12V Sampling Pump Tornado 30m
349.00 € excl. VAT -
Water Meter B Meters GMDM-I
Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.
From: 29.00 €Water Meter B Meters GMDM-I
From: 29.00 € -
QED AutoPump AP2
- Efficient operation in wells with diameters as small as 2″
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function and pumps particles up to 1/8 inch in diameter.
- Able to pump products with specific gravity as low as .72
- Viscous pumps able to pump liquids up to 7,000 cSt
- 5 Year Warranty
Price On RequestQED AutoPump AP2
Price On Request -
12V Sampling Pump Mini-Monsoon 21m
- Pumping depth: 21 m DTW
- Watt consumption (max): 195 W (max)
- DC volt recommendation: 12-15 VDC
- Amp consumption (max): 13 A
- Dimensions: Length: 20″ / Diameter: 1.82″
- Required tubing: 10 mm ID
- Supplied with: 24 m cable, quick disconnect plug & battery clamps
255.00 € excl. VAT12V Sampling Pump Mini-Monsoon 21m
255.00 € excl. VAT -
12V Peristaltic Pump Athena2
- Pumps up to 5 liters per minute or as low as 40 mL per minute
- Suction lift up to 8 m
- Supplied with two pump heads
- 3 m of DC battery clamps to hook up for super-long sampling events
- Dimensions: Depth 25 cm x Width 38 cm x Height 17 cm
- Weight of Product: 4.5 kg
1,759.00 € excl. VAT12V Peristaltic Pump Athena2
1,759.00 € excl. VAT -
QED SOS AutoGenie Active Skimmer
- SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
- All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
- The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
- The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
- The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
- A complete line of matched accessories is available to help with installation and performance
Price On RequestQED SOS AutoGenie Active Skimmer
Price On Request -
QED SPG AutoGenie Active Skimmer
- SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
- All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
- The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
- The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
- The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
- A complete line of matched accessories is available to help with installation and performance
Price On RequestQED SPG AutoGenie Active Skimmer
Price On Request -
3″ ATEX Pump 99 316 TREINCH EX 40-22
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 40-22
Price On Request -
3″ ATEX Pump 99 316 TREINCH EX 40-15
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 40-15
Price On Request -
3″ ATEX Pump 99 316 TREINCH EX 25-20
- Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
- External casing, motor casing, motor support and other components in AISI 316 stainless steel
- Impellers and diffusers in special technopolymer
- Incorporated non-return valve
- Temperature of the pumped liquid: max +40 °C
- Max immersion depth: 20m
- Available in a version for permanent immersion in hydrocarbons (ID EX series)
Price On Request3″ ATEX Pump 99 316 TREINCH EX 25-20
Price On Request -
BE 80-200-13 2.2 kW
- Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
- External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
- Impellers and diffusers in special technopolymer
- Built-in stainless steel non-return valve
- Viton seals
- Electric pumps are produced with the required lengths of electric cable
- Available in AISI 316 version
Price On RequestBE 80-200-13 2.2 kW
Price On Request