Solinst offers a wide range of high-quality water level meters, interface meters, and conductivity meters for accurate measurements in environmental and groundwater monitoring.

  • Water Meter Woltmann WDE-K50

    Horizontal water meter Woltmann with removable insert. Sealed counter mechanism with magnetic transmission. Inductive pre-equipment for the installation of data communicating modules wireless OMS M-Bus and non-magnetic pulse output.

    Water Meter Woltmann WDE-K50

    From: 189.00 
  • Water Meter Tangential TAN-X5

    Tangential water meter for irrigation purposes, dry dial, magnetic transmission. Suitable for the measuring of dirty water (solid sediments). Pre-equipped for pulse emitter device mounting.

  • Water Meter B Meters GMDM-I

    Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.

    Water Meter B Meters GMDM-I

    From: 29.00 
  • QED SOS AutoGenie Active Skimmer

    • SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED SPG AutoGenie Active Skimmer

    • SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 40-22

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 40-15

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • 3″ ATEX Pump 99 316 TREINCH EX 25-20

    • Multistage centrifugal electric submersible pumps for 3″ wells with bottom inlet: the hydraulic part is located under the motor which is externally cooled by the pumped liquid
    • External casing, motor casing, motor support and other components in AISI 316 stainless steel
    • Impellers and diffusers in special technopolymer
    • Incorporated non-return valve
    • Temperature of the pumped liquid: max +40 °C
    • Max immersion depth: 20m
    • Available in a version for permanent immersion in hydrocarbons (ID EX series)
    Price On Request
  • BE 80-200-13 2.2 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-13 2.2 kW

    Price On Request
  • BE 80-200-9 1.5 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-9 1.5 kW

    Price On Request
  • BE 80-200-6 1.1 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-200-6 1.1 kW

    Price On Request
  • BE 80-100-24 2.2 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-100-24 2.2 kW

    Price On Request
  • BE 80-100-17 1.5 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-100-17 1.5 kW

    Price On Request
  • BE 80-100-13 1.1 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-100-13 1.1 kW

    Price On Request
  • BE 80-100-9 0.75 kW

    • Multistage centrifugal electric submersible pumps with floating impellers that allow the pumping of leachate with small suspended solids
    • External casing, delivery port, suction port, shaft, and other components in AISI 304 stainless steel
    • Impellers and diffusers in special technopolymer
    • Built-in stainless steel non-return valve
    • Viton seals
    • Electric pumps are produced with the required lengths of electric cable
    • Available in AISI 316 version
    Price On Request

    BE 80-100-9 0.75 kW

    Price On Request

Main Menu