Viridian Systems specializes in producing high-quality pneumatic pumps designed specifically for landfill and remediation applications.
-
Pressure Switch Italtecnica PM/5
Pressure range: 1 – 5 Bar
Factory setting: 1,4 – 2,8 Bar
Min differential: 0,6 Bar
Max differential: 2,3 bar
Rated current: 16 A
Rated voltage: 250V
16.00 € excl. VATPressure Switch Italtecnica PM/5
16.00 € excl. VAT -
Kit of 3 Level Probes Lovato
Single-pole probes used for level control in wells or storage tanks.
29.00 € excl. VATKit of 3 Level Probes Lovato
29.00 € excl. VAT -
Control Panel Elentek Smart Pro 380V
Born from the need to combine in a single product the functions of panels for clean water (emptying, filling, pressurization, etc) and sewage pump panels (emptying and sewage water) and to offer always more function, safety, and control, Smart Pro raises the standard without extra cost!
205.00 € excl. VATControl Panel Elentek Smart Pro 380V
205.00 € excl. VAT -
Control Panel Elentek Smart Pro 220V
Born from the need to combine in a single product the functions of panels for clean water (emptying, filling, pressurization, etc) and sewage pump panels (emptying and sewage water) and to offer always more function, safety, and control, Smart Pro raises the standard without extra cost!
155.00 € excl. VATControl Panel Elentek Smart Pro 220V
155.00 € excl. VAT -
Control Panel Elentek Drytek Pro 380V
Protection from:
- motor overcurrent (adjustable)
- phase failure/loss
- min/max voltage (adjustable)
- max current (adjustable)
- dry running power factor (COS Ø adjustable)
229.00 € excl. VATControl Panel Elentek Drytek Pro 380V
229.00 € excl. VAT -
Pulse Emitter IWM-PL3
IWM-PL3 is suitable for many applications for remote reading in the residential, commercial and industrial sectors, acting as an electronic impulse that allows the acquisition of the consumption of the counter by third-party systems with a universal interface and integrating advanced counting and detection functions frauds.
Pulse Emitter IWM-PL3
Price On Request -
Elentek Startbox 0.55kW 25µF
- Power supply 1~50/60 Hz 230V ±10%;
- Normally open contact for start;
- Capacitor 25µF included;
- Overload thermal relay externally restorable;
- Luminous main switch 0-1;
- Thermoplastic box, IP55;
- Outlet with cable holder;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
28.00 € excl. VATElentek Startbox 0.55kW 25µF
28.00 € excl. VAT -
Pressure Switch Italtecnica PM/12
Pressure range: 3 – 12 Bar
Factory setting: 5 – 7 Bar
Min differential: 1.5 Bar
Max differential: 5 bar
Rated current: 16 A
Rated voltage: 250V
19.00 € excl. VATPressure Switch Italtecnica PM/12
19.00 € excl. VAT -
Control Panel Elentek Drytek 220V
Protection from:
- motor overcurrent (adjustable)
- phase failure/loss
- min/max voltage (adjustable)
- max current (adjustable)
- dry running power factor (COS Ø adjustable)
159.00 € excl. VATControl Panel Elentek Drytek 220V
159.00 € excl. VAT -
Water Meter B Meters GMDM-I
Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.
From: 29.00 €Water Meter B Meters GMDM-I
From: 29.00 € -
Float switch FLO
- Cable: 10m
- Power supply: max. 10A 250V
- Activation angle: 45°
- Depth: max. 10 m
- Temperature: max. +50°C
35.00 € excl. VATFloat switch FLO
35.00 € excl. VAT -
Elentek Startbox 1.5kW 50µF
- Power supply 1~50/60 Hz 230V ±10%;
- Normally open contact for start;
- Capacitor 50µF included;
- Overload thermal relay externally restorable;
- Luminous main switch 0-1;
- Thermoplastic box, IP55;
- Outlet with cable holder;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
30.00 € excl. VATElentek Startbox 1.5kW 50µF
30.00 € excl. VAT -
Elentek Startbox 1.1kW 40µF
- Power supply 1~50/60 Hz 230V ±10%;
- Normally open contact for start;
- Capacitor 40µF included;
- Overload thermal relay externally restorable;
- Luminous main switch 0-1;
- Thermoplastic box, IP55;
- Outlet with cable holder;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
29.00 € excl. VATElentek Startbox 1.1kW 40µF
29.00 € excl. VAT -
Elentek Startbox 0.75kW 35µF
- Power supply 1~50/60 Hz 230V ±10%;
- Normally open contact for start;
- Capacitor 35µF included;
- Overload thermal relay externally restorable;
- Luminous main switch 0-1;
- Thermoplastic box, IP55;
- Outlet with cable holder;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
29.00 € excl. VATElentek Startbox 0.75kW 35µF
29.00 € excl. VAT -
Elentek Startbox 0.55kW 20µF
- Power supply 1~50/60 Hz 230V ±10%;
- Normally open contact for start;
- Capacitor 20µF included;
- Overload thermal relay externally restorable;
- Luminous main switch 0-1;
- Thermoplastic box, IP55;
- Outlet with cable holder;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).
28.00 € excl. VATElentek Startbox 0.55kW 20µF
28.00 € excl. VAT