Heron Instruments offers a wide range of water level meters, interface meters, and borehole cameras for accurate monitoring and measurement of water levels and quality.
-
Heron dipperLog – Suspended Version
- Memory – 32,000 – 128,000 data units (deepness and temperature)
- Download Speed – 32,000 data points/90 sec.
- Battery – 5, 10 or 15 years life if sampling every 5 min
- Calibration Certificate
- Antifouling protection
Price On RequestHeron dipperLog – Suspended Version
Price On Request -
Water Meter B Meters GMDM-I
Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.
From: 29.00 €Water Meter B Meters GMDM-I
From: 29.00 € -
Conductivity & Temp Meter Heron Cplus
This device provides precise information about conductivity, level of water and its temperature in wells, drill-holes, pipes and river mouths.
Price On RequestConductivity & Temp Meter Heron Cplus
Price On Request -
ATEX Oil/Water Interface Meter Heron Sm.OIL
- Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
- Detects floating product (LNAPL), sinking product (DNAPL) and water
- Measures extremely thin spots of liquid (1mm (1/200’))
- Earthing
- Electronic Module (IP65) – Automatical turning off after 10 minutes, can be easily removed if cleaning and repairing are needed
- Probe (IP68) – stands against high pressure, 19mm (3/4”), easy to replace
- Steel Tape – strong and reliable with Kynar covering, long-lasting markings in both scales
- Padded Carry Case – for protection
- Hanger – for supporting the tool on the top
- Handle – comfortable and solid handle on the frame
- Winding Handle – makes it easy to rewind with gloves on
Price On RequestATEX Oil/Water Interface Meter Heron Sm.OIL
Price On Request -
ATEX Oil/Water Interface Meter Heron H.OIL
- Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
- Detects floating product (LNAPL), sinking product (DNAPL) and water
- Measures extremely thin spots of liquid (1mm (1/200’))
- Earthing
- Electronic Module (IP65) – Automatical turning off after 10 minutes, can be easily removed if cleaning and repairing are needed
- Probe (IP68) – stands against high pressure, 19mm (3/4”), easy to replace
- Steel Tape – strong and reliable with Kynar covering, long-lasting markings in both scales
- Padded Carry Case – for protection
- Hanger – for supporting the tool on the top
- Handle – comfortable and solid handle on the frame
- Winding Handle – makes it easy to rewind with gloves on
Price On RequestATEX Oil/Water Interface Meter Heron H.OIL
Price On Request -
Heron dipper-See H2GO
- Most portable borehole inspection camera
- Record up to 4.5 hours on a single charge
- Long-term logging mode – leave in the well and record 20-second clips every hour for up to a month
- Insert 64 Gb microSD into smartphone/tablet or computer for video playback
Price On RequestHeron dipper-See H2GO
Price On Request -
Gas Powered Core Sampling Kit
The complete set contains: Gas Powered REDI Boss Hammer, (1) 4ft. Deluxe AMS Carrying Case, (1) 3ft. Deluxe AMS Carrying Case, GP Slotted Sampler Tube 4ft., (2) GP Upper Extensions 2ft., (2) GP Lower Extensions 2ft., GP Drive Head Adapter, (2) 12in. Pipe Wrenches, Clean Out Spoon, GP Drive Tip, GP Liner Retainer Coupler, AMS Foot Jack, 2in. Foot Jack Shackles (1 Set of 2), 1-1/2in. Core Catcher, Cleaning rods with brushes & T-handle, (4) plastic end caps, (1) plastic liner 1.5in. x 4ft & (1) plastic liner 1.5in. x 2ft.
Price On RequestGas Powered Core Sampling Kit
Price On Request -
2″ Stainless Steel Flighted Auger Kit
Kit includes: 5/8″ threaded male to SDS Max adapter, 1 1/2″ x 6″ soil core sampler, slide hammer, 2″ flighted lead auger with hard-surfaced tip, 2″ carbide tip, two 2″ x 3′ flighted extensions, three 5/8″ x 4′ extensions, universal slip wrench, 1 1/2″ x 12″ nylon brush, AMS deluxe carrying case.
Price On Request2″ Stainless Steel Flighted Auger Kit
Price On Request -
2″ Flighted Auger Kit
Kit includes: 5/8″ threaded male to SDS Max adapter, 1 1/2″ x 6″ soil core sampler, slide hammer, 2″ flighted lead auger with hard-surfaced tip, 2″ carbide tip, two 2″ x 3′ flighted extensions, three 5/8″ x 4′ extensions, universal slip wrench, 1 1/2″ x 12″ nylon brush, AMS deluxe carrying case.
Price On Request2″ Flighted Auger Kit
Price On Request -
Soil Fertility Sampling Kit w/Compact Slide Hammer
Kit contents include: replaceable tip soil probe with 12” sample slot, 10” comfortably gripped the cross handle, 2ft. extension, adjustable footstep, soil ejector scoop, cleaning brush, spanner wrench, general purpose tip, dry tip, wet tip, serrated tip, 1-1/4” x 18” triple lead flighted auger, compact carrying case.
Price On RequestSoil Fertility Sampling Kit w/Compact Slide Hammer
Price On Request -
Soil Fertility Sampling Kit w/Hammer Head Cross Handle
Kit contents include: replaceable tip soil probe with 12” sample slot, 10” comfortably gripped the cross handle, 2ft. extension, adjustable footstep, soil ejector scoop, cleaning brush, spanner wrench, general purpose tip, dry tip, wet tip, serrated tip, 1-1/4” x 18” triple lead flighted auger, compact carrying case.
Price On RequestSoil Fertility Sampling Kit w/Hammer Head Cross Handle
Price On Request -
Bulk Density Soil Sampling Kit W/Compact Slide Hammer
Kit includes: Core sampler cup, compact slide hammer attachment, 2-1/2” open-face auger, 2-3/4” regular soil bucket auger, 2-3/4” planer auger, 2ft. extension rod, 18” rubber-coated cross handle, 2” x 2” stainless steel rings (25) with their own aluminum carrying case w/ foam inserts, 2” plastic end caps (50), adjustable wrenches (2), auger cleanout tool, nylon cleaning brush, impact-absorbing hammer, AMS deluxe carrying case with handles and wheels for added portability
Price On RequestBulk Density Soil Sampling Kit W/Compact Slide Hammer
Price On Request