Melmach offers high-quality and economical water level meters and sampling bailers for accurate measurement and sampling in various environmental applications.

  • Grundfos MP1 mounted on reel

    Grundfos MP1 mounted on wheeled stainless steel cable reel with hose and safety cable: completed with fittings, pump holder, purging and sampling tube, quick electrical connections, stainless steel safety cable, and non-toxic PVC hose. Fully assembled and ready for use in the field.

    Price On Request
  • QED SOS AutoGenie Active Skimmer

    • SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED SPG AutoGenie Active Skimmer

    • SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • Cable termination KIT

    • Heat shrinking tube for cable up to 4G2.5 – 1 pc
    • Insulated butt splice for wire ross-section 1.5÷2.5mm2 – 5 pcs
    • Heat shrinking tube for wires up to 1G2.5 – 5 pcs
    • Self-amalgamating tape – 1 pc
    15.00  excl. VAT

    Cable termination KIT

    15.00  excl. VAT
  • Cable reel for bailer

    • Flat cable with steel core and external protection sheath
    • Graduation at 1 cm intervals (directly printed on the cable)
    • Cable reel in antishock PVC, with brake
    • Painted iron frame

    Cable reel for bailer

    From: 129.00 
  • QED AutoPump AP4 Ultra – Xtreme

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Clearance

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Viscosity

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4+ for Aggressive Fluids

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Stainless steel parts have been upgraded to 316-grade and nonmetallic internal parts are PVDF
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter
    • The AP4+ air valves can pass 90-weight oil without fouling
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP4 Ultra

    Price On Request
  • Electromagnetic Flow Meter RSMAG

    • Flow measurement for conductive liquids
    • Dn from 25 to 200 mm
    • Connections DIN 11851 and CLAMP DIN 32676
    • Measurement accuracy: ± 0.2%; ± 0.5%
    • PFA coatings
    • Power supply 85 ÷ 265Vac; 12Vdc; 24Vdc; 24Vac
    • Datalogger on USB pendrive
    • Removable O-LED display module
    • Remote control via Smartphone
    Price On Request
  • MID Certified Electromagnetic Flow Meter RPMAGM

    • Dn 10 ÷ 250
    • Accuracy: class II
    • RUBBER / PTFE lining
    • Power supply 85 ÷ 265 Vac or 12; 24 Vac/Vdc
    • Configuration and displaying via VL701 with O-LED display
    Price On Request
  • Electromagnetic Flow Meter RPMAG

    • Flow measurement for conductive and chemically aggressive liquids
    • Dn from 10 to 2000 mm
    • Measurement accuracy: ± 0.2%; ± 0.5%
    • Neoprene / PTFE coatings
    • Power supply 85 ÷ 265 Vac; 12Vdc; 24 Vdc / Vac
    • Datalogger on USB pendrive
    • Removable O-LED display module
    • Remote control via Smartphone
    Price On Request

Main Menu